======= Wed Jul 8 22:45:47 2020 (adjust=86.8us) 00.000: [ 3.641643] max77693-muic max77693-muic: CONTROL1 : 0x1b, CONTROL2 : 0x04, state : attached -0.000: [ 3.648902] max77693-muic max77693-muic: device ID : 0x8d 00.002: [ 3.656977] max77693-haptic max77693-haptic: DMA mask not set 00.002: [ 3.661325] max77693-haptic max77693-haptic: failed to get regulator 00.006: [ 3.673149] i2c-gpio i2c-gpio-1: using lines 143 (SDA) and 144 (SCL) 00.006: [ 3.678206] i2c-gpio i2c-gpio-3: GPIO lookup for consumer sda 00.006: [ 3.683759] i2c-gpio i2c-gpio-3: using device tree for GPIO lookup 00.006: [ 3.689983] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-3[0]' - status (0) 00.006: [ 3.699327] i2c-gpio i2c-gpio-3: GPIO lookup for consumer scl 00.006: [ 3.705048] i2c-gpio i2c-gpio-3: using device tree for GPIO lookup 00.006: [ 3.711208] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-3[0]' - status (0) 00.010: [ 3.726110] max17042 12-0036: SOC threshold INTR 00.019: [ 3.739286] i2c-gpio i2c-gpio-3: using lines 53 (SDA) and 52 (SCL) 00.019: [ 3.743456] power_supply max170xx_battery: driver failed to report `current_now' property: -22 00.019: [ 3.744160] i2c-gpio i2c-gpio-4: GPIO lookup for consumer sda 00.019: [ 3.758339] i2c-gpio i2c-gpio-4: using device tree for GPIO lookup 00.018: [ 3.764528] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-4[0]' - status (0) 00.018: [ 3.773883] i2c-gpio i2c-gpio-4: GPIO lookup for consumer scl 00.018: [ 3.779576] i2c-gpio i2c-gpio-4: using device tree for GPIO lookup 00.018: [ 3.785788] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-4[0]' - status (0) 00.025: [ 3.803373] power_supply max170xx_battery: driver failed to report `current_now' property: -22 00.026: [ 3.813280] tm2-touchkey 14-0020: failed to get regulators: -517 00.032: [ 3.823970] i2c-gpio i2c-gpio-4: using lines 113 (SDA) and 112 (SCL) 00.032: [ 3.829095] i2c-gpio i2c-mhl: GPIO lookup for consumer sda 00.032: [ 3.834344] i2c-gpio i2c-mhl: using device tree for GPIO lookup 00.032: [ 3.840242] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-mhl[0]' - status (0) 00.032: [ 3.849366] i2c-gpio i2c-mhl: GPIO lookup for consumer scl 00.032: [ 3.854824] i2c-gpio i2c-mhl: using device tree for GPIO lookup 00.032: [ 3.860722] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-mhl[0]' - status (0) 00.164: [ 4.003458] i2c-gpio i2c-mhl: using lines 44 (SDA) and 46 (SCL) 00.164: [ 4.008066] i2c-gpio i2c-gpio-0: GPIO lookup for consumer sda 00.164: [ 4.013633] i2c-gpio i2c-gpio-0: using device tree for GPIO lookup 00.164: [ 4.019883] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-0[0]' - status (0) 00.163: [ 4.029207] i2c-gpio i2c-gpio-0: GPIO lookup for consumer scl 00.163: [ 4.034924] i2c-gpio i2c-gpio-0: using device tree for GPIO lookup 00.163: [ 4.041086] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-0[0]' - status (0) 00.165: [ 4.053320] ak8975 9-000c: GPIO lookup for consumer (null) 00.165: [ 4.057364] ak8975 9-000c: using device tree for GPIO lookup 00.165: [ 4.062997] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-gpio-0/ak8975@c[0]' - status (0) 00.165: [ 4.072829] ak8975 9-000c: mounting matrix not found: using identity... 00.165: [ 4.079427] ak8975 9-000c: supply vdd not found, using dummy regulator 00.165: [ 4.086013] ak8975 9-000c: supply vid not found, using dummy regulator 00.174: [ 4.102113] i2c-gpio i2c-gpio-0: using lines 178 (SDA) and 179 (SCL) 00.174: [ 4.107153] i2c-gpio i2c-gpio-2: GPIO lookup for consumer sda 00.174: [ 4.112715] i2c-gpio i2c-gpio-2: using device tree for GPIO lookup 00.174: [ 4.118931] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-2[0]' - status (0) 00.173: [ 4.128288] i2c-gpio i2c-gpio-2: GPIO lookup for consumer scl 00.173: [ 4.134005] i2c-gpio i2c-gpio-2: using device tree for GPIO lookup 00.173: [ 4.140166] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-2[0]' - status (0) 00.183: [ 4.160993] i2c-gpio i2c-gpio-2: using lines 40 (SDA) and 41 (SCL) 00.183: [ 4.166024] s3c-i2c 13860000.i2c: slave address 0x10 00.183: [ 4.170648] s3c-i2c 13860000.i2c: bus frequency set to 390 KHz 00.185: [ 4.179620] s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter 00.185: [ 4.183738] s3c-i2c 13890000.i2c: slave address 0x10 00.185: [ 4.188447] s3c-i2c 13890000.i2c: bus frequency set to 390 KHz 00.186: [ 4.197321] mms114 3-0048: Unable to get the Core regulator (-517) 00.186: [ 4.202113] s3c-i2c 13890000.i2c: i2c-3: S3C I2C adapter 00.186: [ 4.207631] s3c-i2c 138a0000.i2c: slave address 0x10 00.186: [ 4.212269] s3c-i2c 138a0000.i2c: bus frequency set to 97 KHz 00.189: [ 4.221149] wm8994 4-001a: GPIO lookup for consumer wlf,ldo1ena 00.189: [ 4.225632] wm8994 4-001a: using device tree for GPIO lookup 00.189: [ 4.231252] of_get_named_gpiod_flags: can't parse 'wlf,ldo1ena-gpios' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 00.188: [ 4.242037] of_get_named_gpiod_flags: can't parse 'wlf,ldo1ena-gpio' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 00.188: [ 4.252729] of_get_named_gpiod_flags: parsed 'wlf,ldo1ena' property of node '/soc/i2c@138a0000/wm1811@1a[0]' - status (0) 00.188: [ 4.264398] wm8994 4-001a: GPIO lookup for consumer wlf,ldo2ena 00.188: [ 4.269510] wm8994 4-001a: using device tree for GPIO lookup 00.188: [ 4.275209] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena-gpios' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 00.188: [ 4.285959] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena-gpio' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 00.189: [ 4.296633] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 00.189: [ 4.306858] wm8994 4-001a: using lookup tables for GPIO lookup 00.189: [ 4.312651] wm8994 4-001a: No GPIO consumer wlf,ldo2ena found 00.189: [ 4.319692] s3c-i2c 138a0000.i2c: i2c-4: S3C I2C adapter 00.189: [ 4.324004] s3c-i2c 138b0000.i2c: slave address 0x00 00.189: [ 4.328624] s3c-i2c 138b0000.i2c: bus frequency set to 97 KHz 00.188: [ 4.334832] s3c-i2c 138b0000.i2c: i2c-5: S3C I2C adapter 00.188: [ 4.339903] s3c-i2c 138d0000.i2c: slave address 0x10 00.188: [ 4.344638] s3c-i2c 138d0000.i2c: bus frequency set to 97 KHz 00.223: [ 4.386449] of_get_named_gpiod_flags: can't parse 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/LDO20[0]' 00.223: [ 4.398325] of_get_named_gpiod_flags: can't parse 'maxim,ena-gpio' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/LDO20[0]' 00.223: [ 4.412745] of_get_named_gpiod_flags: parsed 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/LDO21[0]' - status (0) 00.223: [ 4.425693] random: fast init done 00.223: [ 4.430194] of_get_named_gpiod_flags: parsed 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/LDO22[0]' - status (0) 00.224: [ 4.446152] TSP_VDD_1.8V: Bringing 2200000uV into 1800000-1800000uV 00.226: [ 4.454267] LCD_VCC_3.3V: Bringing 3300000uV into 2800000-2800000uV 00.248: [ 4.481333] of_get_named_gpiod_flags: parsed 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/BUCK8[0]' - status (0) 00.248: [ 4.493886] gpio-85 (max77686-regulator): gpiod_request: status -16 00.248: [ 4.500991] VMEM_VDDF_3.0V: Bringing 3000000uV into 2850000-2850000uV 00.248: [ 4.509047] of_get_named_gpiod_flags: parsed 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/BUCK9[0]' - status (0) 00.386: [ 4.660612] max77686-rtc max77686-rtc: registered as rtc0 00.418: [ 4.698437] max77686-rtc max77686-rtc: setting system clock to 2012-01-01T00:30:54 UTC (1325377854) 00.419: [ 4.707884] s3c-i2c 138d0000.i2c: i2c-7: S3C I2C adapter 00.420: [ 4.714247] OF: graph: no port node found in /soc/dsi@11c80000 00.420: [ 4.718850] [drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations 00.420: [ 4.726427] exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops) 00.420: [ 4.734988] panel-samsung-s6e8aa0 11c80000.dsi.0: GPIO lookup for consumer reset 00.420: [ 4.740914] panel-samsung-s6e8aa0 11c80000.dsi.0: using device tree for GPIO lookup 00.420: [ 4.748627] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/dsi@11c80000/panel@0[0]' - status (0) 00.420: [ 4.759541] exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops) 00.420: [ 4.767068] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). 00.949: [ 5.013973] panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x60, 0x90 00.949: [ 5.271621] Console: switching to colour frame buffer device 90x80 00.949: [ 5.315522] exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device 00.949: [ 5.322877] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0 00.950: [ 5.331081] lima 13000000.gpu: gp - mali400 version major 1 minor 1 00.950: [ 5.335977] lima 13000000.gpu: pp0 - mali400 version major 1 minor 1 00.950: [ 5.342283] lima 13000000.gpu: pp1 - mali400 version major 1 minor 1 00.950: [ 5.348644] lima 13000000.gpu: pp2 - mali400 version major 1 minor 1 00.950: [ 5.354974] lima 13000000.gpu: pp3 - mali400 version major 1 minor 1 00.950: [ 5.361264] lima 13000000.gpu: l2 cache 128K, 4-way, 64byte cache line, 64bit external bus 00.950: [ 5.369964] lima 13000000.gpu: bus rate = 160000000 00.950: [ 5.374369] lima 13000000.gpu: mod rate = 50000000 00.950: [ 5.379215] debugfs: Directory '13000000.gpu-mali' with parent 'VDD_G3D' already present! 00.950: [ 5.388100] lima 13000000.gpu: Failed to register cooling device 00.950: [ 5.393732] [drm] Initialized lima 1.1.0 20191231 for 13000000.gpu on minor 1 00.951: [ 5.403173] dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 00.951: [ 5.408782] dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 00.951: [ 5.417228] dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM 00.953: [ 5.428611] rtc rtc1: invalid alarm value: 1900-01-01T00:00:00 00.953: [ 5.433184] s3c-rtc 10070000.rtc: registered as rtc1 00.953: [ 5.439089] s5p-mipi-csis 11880000.csis: lanes: 4, hs_settle: 12, wclk: 0, freq: 166000000 00.953: [ 5.446833] s5p-mipi-csis 11890000.csis: lanes: 1, hs_settle: 18, wclk: 1, freq: 166000000 00.954: [ 5.455773] s5p-fimc-md soc:camera: Entity type for entity FIMC.0 was not initialized! 00.954: [ 5.462657] s5p-fimc-md: Registered fimc.0.m2m as /dev/video4 00.954: [ 5.468347] s5p-fimc-md: Registered fimc.0.capture as /dev/video5 00.954: [ 5.474177] s5p-fimc-md soc:camera: Entity type for entity FIMC.1 was not initialized! 00.954: [ 5.482194] s5p-fimc-md: Registered fimc.1.m2m as /dev/video6 00.954: [ 5.487976] s5p-fimc-md: Registered fimc.1.capture as /dev/video7 00.953: [ 5.494151] s5p-fimc-md: Registered fimc-lite.0.capture as /dev/video8 00.953: [ 5.500536] s5p-fimc-md: Registered fimc-lite.1.capture as /dev/video9 00.960: [ 5.514284] pwrseq_simple sdhci3-pwrseq: GPIO lookup for consumer reset 00.960: [ 5.519423] pwrseq_simple sdhci3-pwrseq: using device tree for GPIO lookup 00.960: [ 5.526352] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdhci3-pwrseq[0]' - status (0) 00.960: [ 5.536127] pwrseq_simple sdhci3-pwrseq: GPIO array info: chip=gpj0, size=1, get_mask=1, set_mask=1, invert_mask=1 00.960: [ 5.547152] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc/sdhci@12530000[0]' - status (0) 00.960: [ 5.556470] s3c-sdhci 12530000.sdhci: clock source 2: mmc_busclk.2 (50000000 Hz) 00.959: [ 5.563820] s3c-sdhci 12530000.sdhci: GPIO lookup for consumer cd 00.959: [ 5.569881] s3c-sdhci 12530000.sdhci: using device tree for GPIO lookup 00.959: [ 5.576500] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc/sdhci@12530000[0]' - status (0) 00.960: [ 5.586464] s3c-sdhci 12530000.sdhci: Got CD GPIO 00.960: [ 5.591121] s3c-sdhci 12530000.sdhci: GPIO lookup for consumer wp 00.960: [ 5.597215] s3c-sdhci 12530000.sdhci: using device tree for GPIO lookup 00.960: [ 5.603806] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/sdhci@12530000[0]' 00.960: [ 5.613118] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/sdhci@12530000[0]' 00.960: [ 5.622306] s3c-sdhci 12530000.sdhci: using lookup tables for GPIO lookup 00.959: [ 5.629080] s3c-sdhci 12530000.sdhci: No GPIO consumer wp found 00.986: [ 5.663498] mmc0: SDHCI controller on samsung-hsmmc [12530000.sdhci] using ADMA 00.987: [ 5.671062] s3c-sdhci 12540000.sdhci: clock source 2: mmc_busclk.2 (40000000 Hz) 00.987: [ 5.677179] s3c-sdhci 12540000.sdhci: GPIO lookup for consumer wp 00.987: [ 5.683080] s3c-sdhci 12540000.sdhci: using device tree for GPIO lookup 00.987: [ 5.689799] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/sdhci@12540000[0]' 00.987: [ 5.699065] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/sdhci@12540000[0]' 00.987: [ 5.708230] s3c-sdhci 12540000.sdhci: using lookup tables for GPIO lookup 00.988: [ 5.715002] s3c-sdhci 12540000.sdhci: No GPIO consumer wp found 00.988: [ 5.720920] s3c-sdhci 12540000.sdhci: allocated mmc-pwrseq 01.013: [ 5.754187] mmc1: SDHCI controller on samsung-hsmmc [12540000.sdhci] using ADMA 01.016: [ 5.764173] dwmmc_exynos 12550000.mmc: IDMAC supports 32-bit address mode. 01.016: [ 5.770263] dwmmc_exynos 12550000.mmc: Using internal DMA controller. 01.016: [ 5.776285] dwmmc_exynos 12550000.mmc: Version ID is 240a 01.016: [ 5.781597] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 118,32 bit host data width,128 deep fifo 01.016: [ 5.791883] dwmmc_exynos 12550000.mmc: GPIO lookup for consumer wp 01.016: [ 5.797259] dwmmc_exynos 12550000.mmc: using device tree for GPIO lookup 01.016: [ 5.803994] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@12550000[0]' 01.016: [ 5.813019] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@12550000[0]' 01.016: [ 5.822097] dwmmc_exynos 12550000.mmc: using lookup tables for GPIO lookup 01.016: [ 5.828926] dwmmc_exynos 12550000.mmc: No GPIO consumer wp found 01.016: [ 5.835079] mmc_host mmc2: card is non-removable. 01.029: [ 5.853575] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) 01.029: [ 5.861945] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) 01.030: [ 5.869631] mmc1: queuing unknown CIS tuple 0x80 (6 bytes) 01.030: [ 5.874648] exynos-adc 126c0000.adc: IRQ index 1 not found 01.033: [ 5.884312] input: max77693-haptic as /devices/platform/i2c-gpio-1/i2c-11/11-0066/max77693-haptic/input/input2 01.098: [ 5.959186] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) 01.098: [ 5.968371] mmc2: new DDR MMC card at address 0001 01.104: [ 5.978935] mmc1: new high speed SDIO card at address 0001 01.104: [ 5.984761] mmcblk2: mmc2:0001 MAG4FB 14.7 GiB 01.104: [ 5.988361] mmcblk2boot0: mmc2:0001 MAG4FB partition 1 2.00 MiB 01.104: [ 5.994048] mmcblk2boot1: mmc2:0001 MAG4FB partition 2 2.00 MiB 01.104: [ 5.999899] mmcblk2rpmb: mmc2:0001 MAG4FB partition 3 128 KiB, chardev (245:0) 01.106: [ 6.010861] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 01.153: [ 6.064803] input: tm2-touchkey as /devices/platform/i2c-gpio-4/i2c-14/14-0020/input/input3 01.155: [ 6.074731] of_get_named_gpiod_flags: parsed 'standby-gpios' property of node '/soc/i2c@13860000/s5c73m3@3c[0]' - status (0) 01.155: [ 6.084853] of_get_named_gpiod_flags: parsed 'xshutdown-gpios' property of node '/soc/i2c@13860000/s5c73m3@3c[0]' - status (0) 01.156: [ 6.098507] S5C73M3: S5C73M3 SPI probed successfully 01.171: [ 6.118108] S5C73M3: Sensor type: CML0801-M080, FW version: GHFJ02 01.175: [ 6.128137] s5p-fimc-md: Registered sensor subdevice: S5C73M3-OIF (0) 01.175: [ 6.133106] S5C73M3: s5c73m3_probe: completed successfully 01.175: [ 6.139706] input: MELFAS MMS114 Touchscreen as /devices/platform/soc/13890000.i2c/i2c-3/3-0048/input/input4 01.175: [ 6.149360] wm8994 4-001a: GPIO lookup for consumer wlf,ldo1ena 01.175: [ 6.154403] wm8994 4-001a: using device tree for GPIO lookup 01.175: [ 6.160009] of_get_named_gpiod_flags: can't parse 'wlf,ldo1ena-gpios' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 01.175: [ 6.170793] of_get_named_gpiod_flags: can't parse 'wlf,ldo1ena-gpio' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 01.175: [ 6.181498] of_get_named_gpiod_flags: parsed 'wlf,ldo1ena' property of node '/soc/i2c@138a0000/wm1811@1a[0]' - status (0) 01.175: [ 6.192959] VSIL_1.2V: supplied by VCC_SUB_2.0V 01.175: [ 6.198357] wm8994 4-001a: GPIO lookup for consumer wlf,ldo2ena 01.175: [ 6.202830] wm8994 4-001a: using device tree for GPIO lookup 01.175: [ 6.208505] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena-gpios' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 01.175: [ 6.219365] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena-gpio' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 01.175: [ 6.229908] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 01.175: [ 6.240133] wm8994 4-001a: using lookup tables for GPIO lookup 01.175: [ 6.245950] wm8994 4-001a: No GPIO consumer wlf,ldo2ena found 01.176: [ 6.254028] wm8994 4-001a: supply DBVDD2 not found, using dummy regulator 01.176: [ 6.259611] wm8994 4-001a: supply DBVDD3 not found, using dummy regulator 01.176: [ 6.267261] wm8994 4-001a: supply AVDD2 not found, using dummy regulator 01.176: [ 6.272977] wm8994 4-001a: supply CPVDD not found, using dummy regulator 01.176: [ 6.279711] wm8994 4-001a: supply SPKVDD1 not found, using dummy regulator 01.176: [ 6.286572] wm8994 4-001a: supply SPKVDD2 not found, using dummy regulator 01.179: [ 6.297767] wm8994 4-001a: WM1811 revision D CUST_ID 00 01.184: [ 6.306966] wm8994 4-001a: No interrupt specified, no interrupts 01.184: [ 6.311832] gpiochip_find_base: found new base at 501 01.184: [ 6.316747] gpio gpiochip42: (wm8994): added GPIO chardev (254:42) 01.184: [ 6.322697] gpio gpiochip42: registered GPIOs 501 to 511 on wm8994 01.185: [ 6.332047] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/camera/fimc-is@12000000/i2c-isp@12140000/s5k6a3@10[0]' - status (0) 01.185: [ 6.343720] s5p-fimc-md: Registered sensor subdevice: S5K6A3 13-0010 (1) 01.185: [ 6.350143] s5p-fimc-md: created link [S5C73M3-OIF] => [s5p-mipi-csis.0] 01.185: [ 6.356816] s5p-fimc-md: created link [S5K6A3 13-0010] => [s5p-mipi-csis.1] 01.185: [ 6.363741] s5p-fimc-md: created link [s5p-mipi-csis.0] => [FIMC.0] 01.185: [ 6.370013] s5p-fimc-md: created link [s5p-mipi-csis.0] -> [FIMC.1] 01.185: [ 6.376259] s5p-fimc-md: created link [s5p-mipi-csis.0] -> [FIMC-LITE.0] 01.185: [ 6.382923] s5p-fimc-md: created link [s5p-mipi-csis.0] -> [FIMC-LITE.1] 01.185: [ 6.389629] s5p-fimc-md: created link [s5p-mipi-csis.1] -> [FIMC-LITE.0] 01.185: [ 6.396308] s5p-fimc-md: created link [s5p-mipi-csis.1] -> [FIMC-LITE.1] 01.186: [ 6.405199] ntc-thermistor thermistor-ap: Thermistor type: ncp15wb473 successfully probed. 01.186: [ 6.412607] ntc-thermistor thermistor-battery: Thermistor type: ncp15wb473 successfully probed. 01.186: [ 6.421547] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/key-down[0]' - status (0) 01.186: [ 6.430818] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/key-up[0]' - status (0) 01.186: [ 6.440059] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/key-power[0]' - status (0) 01.185: [ 6.449893] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/key-ok[0]' - status (0) 01.185: [ 6.459484] input: gpio-keys as /devices/platform/gpio-keys/input/input5 01.185: [ 6.466677] cfg80211: Loading compiled-in X.509 certificates for regulatory database 01.186: [ 6.475903] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 01.186: [ 6.481025] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 01.186: [ 6.489568] cfg80211: failed to load regulatory.db 01.214: [ 6.523359] ALSA device list: 01.214: [ 6.524976] #0: Dummy 1 01.222: [ 6.537787] EXT4-fs (mmcblk2p13): mounted filesystem without journal. Opts: (null) 01.222: [ 6.543978] VFS: Mounted root (ext4 filesystem) readonly on device 179:13. 01.222: [ 6.551314] devtmpfs: mounted 01.224: [ 6.557145] Freeing unused kernel memory: 1024K 01.289: [ 6.625709] Run /init as init process 01.289: [ 6.627927] with arguments: 01.289: [ 6.630875] /init 01.289: [ 6.633130] with environment: 01.289: [ 6.636344] HOME=/ 01.289: [ 6.638601] TERM=linux 01.308: [ 6.662560] random: init: uninitialized urandom read (40 bytes read) 01.500: [ 6.860659] random: init: uninitialized urandom read (40 bytes read) 01.518: [ 6.884758] init: init first stage started! 01.518: [ 6.887939] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt 01.519: [ 6.897255] init: Using Android DT directory /proc/device-tree/firmware/android/ 01.519: [ 6.903774] init: First stage mount skipped (missing/incompatible/empty fstab in device tree) 01.519: [ 6.911846] init: Skipped setting INIT_AVB_VERSION (not in recovery mode) 01.521: [ 6.921680] random: init: uninitialized urandom read (40 bytes read) 01.569: [ 6.975642] init: Loading SELinux policy 01.599: [ 7.009268] SELinux: Permission perfmon in class capability2 not defined in policy. 01.599: [ 7.015691] SELinux: Permission bpf in class capability2 not defined in policy. 01.599: [ 7.022971] SELinux: Permission perfmon in class cap2_userns not defined in policy. 01.599: [ 7.030677] SELinux: Permission bpf in class cap2_userns not defined in policy. 01.599: [ 7.038290] SELinux: Class perf_event not defined in policy. 01.599: [ 7.043755] SELinux: Class lockdown not defined in policy. 01.599: [ 7.049331] SELinux: the above unknown classes and permissions will be denied 01.598: [ 7.056498] SELinux: policy capability network_peer_controls=1 01.598: [ 7.062329] SELinux: policy capability open_perms=1 01.598: [ 7.067298] SELinux: policy capability extended_socket_class=1 01.598: [ 7.073183] SELinux: policy capability always_check_network=0 01.598: [ 7.079043] SELinux: policy capability cgroup_seclabel=0 01.598: [ 7.084393] SELinux: policy capability nnp_nosuid_transition=1 01.598: [ 7.090290] SELinux: policy capability genfs_seclabel_symlinks=0 01.797: [ 7.296826] audit: type=1403 audit(1325377857.090:2): auid=4294967295 ses=4294967295 lsm=selinux res=1 01.797: [ 7.297151] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy 01.797: [ 7.297151] 01.803: [ 7.321926] selinux: SELinux: Loaded file_contexts 01.803: [ 7.321926] 01.855: [ 7.379806] init: init second stage started! 01.886: [ 7.414738] init: Using Android DT directory /proc/device-tree/firmware/android/ 01.891: [ 7.427051] selinux: SELinux: Loaded file_contexts 01.891: [ 7.427051] 01.891: [ 7.431868] init: Running restorecon... 01.894: [ 7.440565] selinux: SELinux: Could not stat /dev/block: No such file or directory. 01.894: [ 7.440565] 01.900: [ 7.455314] selinux: avc: denied { set } for property=persist.service.adb.enable pid=1 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service permissive=1 01.900: [ 7.455314] 01.900: [ 7.474778] init: Couldn't load property file '/product_services/build.prop': open() failed: No such file or directory: No such file or directory 01.900: [ 7.486410] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory 01.900: [ 7.500191] init: Setting product property ro.product.brand to 'Samsung' (from ro.product.odm.brand) 01.900: [ 7.507940] init: Setting product property ro.product.device to 'i9305' (from ro.product.odm.device) 01.972: [ 7.590270] cgroup: Unknown subsys name 'blkio' 01.972: [ 7.594225] audit: type=1400 audit(1325377857.390:3): avc: denied { module_request } for pid=1 comm="init" kmod="fs-cpuset" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1 01.972: [ 7.605353] cgroup: Unknown subsys name 'schedtune' 02.045: [ 7.690533] ueventd: ueventd started! 02.049: [ 7.697744] selinux: SELinux: Loaded file_contexts 02.049: [ 7.697744] 02.049: [ 7.702738] ueventd: Parsing file /ueventd.rc... 02.050: [ 7.709158] ueventd: Parsing file /vendor/ueventd.rc... 02.050: [ 7.712977] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory 02.050: [ 7.722999] ueventd: Parsing file /odm/ueventd.rc... 02.050: [ 7.727932] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory 02.050: [ 7.737644] ueventd: Parsing file /ueventd.smdk4x12.rc... 02.050: [ 7.738800] apexd: Bootstrap subcommand detected 02.050: [ 7.742982] ueventd: Unable to read config file '/ueventd.smdk4x12.rc': open() failed: No such file or directory 02.051: [ 7.760121] apexd: Scanning /system/apex for embedded keys 02.051: [ 7.765524] apexd: Scanning /product/apex for embedded keys 02.051: [ 7.769865] apexd: ... does not exist. Skipping 02.051: [ 7.774441] apexd: Scanning /system/apex looking for APEX packages. 02.051: [ 7.780711] apexd: Found /system/apex/com.android.conscrypt 02.051: [ 7.786420] apexd: Skipped when bootstrapping 02.051: [ 7.790517] apexd: Found /system/apex/com.android.media 02.051: [ 7.795944] apexd: Skipped when bootstrapping 02.051: [ 7.800068] apexd: Found /system/apex/com.android.media.swcodec 02.053: [ 7.810735] printk: apexd: 9 output lines suppressed due to ratelimiting 02.118: [ 7.881834] power_supply max170xx_battery: driver failed to report `current_now' property: -22 02.118: [ 7.888993] synth uevent: /devices/platform/i2c-gpio-3/i2c-12/12-0036/power_supply/max170xx_battery: failed to send uevent 02.118: [ 7.900158] power_supply max170xx_battery: uevent: failed to send synthetic uevent 02.448: [ 8.238545] ueventd: Coldboot took 0.479 seconds 02.820: [ 8.615107] mms114 3-0048: TSP Rev: 0x42, HW Rev: 0x1, Firmware Ver: 0xbd 03.035: [ 8.837647] audit: type=1400 audit(1325377858.630:4): avc: denied { create } for pid=1 comm="init" name="sdcard" scontext=u:r:init:s0 tcontext=u:object_r:tmpfs:s0 tclass=lnk_file permissive=1 03.061: [ 8.880377] cgroup: Unknown subsys name 'bfqio' 03.145: [ 8.968789] logd.auditd: start 03.145: [ 8.970410] logd.klogd: 8966542541 03.174: [ 9.004050] wake enabled for irq 170 03.174: [ 9.006151] wake enabled for irq 171 03.174: [ 9.009931] reboot: Restarting system with comma. 04.056: Samsung S-Boot 4.0 for GT-I9305 (Apr 6 2017 - 16:19:04) 04.056: 04.056: EXYNOS4412(EVT 1.1) / 2044MB / 0MB / Rev 2 / I9305XXSFQD1 /(PKG_ID 0x704f018) 04.056: 04.056: BOOTLOADER VERSION : I9305XXSFQD1 04.056: 04.056: PMIC rev = PASS2(4) 04.056: BUCK1OUT(vdd_mif) = 0x05 04.061: BUCK3DVS1(vdd_int) = 0x28 04.061: cardtype: 0x00000007 04.113: SB_MMC_HS_52MHZ_1_8V_3V_IO 04.113: mmc->card_caps: 0x00000311 04.114: mmc->host_caps: 0x00000311 04.114: [mmc] capacity = 30777344 04.114: 04.114: 04.114: MODEL_NAME:{{GT-I9305}} 04.114: eMMC_SERIAL_NUMBER:{{XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX}} 04.114: 04.114: [ 3.641827] max77693-muic max77693-muic: CONTROL1 : 0x1b, CONTROL2 : 0x04, state : attached 12.614: [ 3.649069] max77693-muic max77693-muic: device ID : 0x8d 12.615: [ 3.657151] max77693-haptic max77693-haptic: DMA mask not set 12.615: [ 3.661498] max77693-haptic max77693-haptic: failed to get regulator 12.620: [ 3.673300] i2c-gpio i2c-gpio-1: using lines 143 (SDA) and 144 (SCL) 12.620: [ 3.678362] i2c-gpio i2c-gpio-3: GPIO lookup for consumer sda 12.620: [ 3.683952] i2c-gpio i2c-gpio-3: using device tree for GPIO lookup 12.620: [ 3.690098] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-3[0]' - status (0) 12.620: [ 3.699478] i2c-gpio i2c-gpio-3: GPIO lookup for consumer scl 12.620: [ 3.705195] i2c-gpio i2c-gpio-3: using device tree for GPIO lookup 12.620: [ 3.711356] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-3[0]' - status (0) 12.624: [ 3.726237] max17042 12-0036: SOC threshold INTR 12.632: [ 3.739355] i2c-gpio i2c-gpio-3: using lines 53 (SDA) and 52 (SCL) 12.632: [ 3.743552] power_supply max170xx_battery: driver failed to report `current_now' property: -22 12.632: [ 3.744229] i2c-gpio i2c-gpio-4: GPIO lookup for consumer sda 12.632: [ 3.758409] i2c-gpio i2c-gpio-4: using device tree for GPIO lookup 12.633: [ 3.764599] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-4[0]' - status (0) 12.633: [ 3.773950] i2c-gpio i2c-gpio-4: GPIO lookup for consumer scl 12.633: [ 3.779645] i2c-gpio i2c-gpio-4: using device tree for GPIO lookup 12.632: [ 3.785855] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-4[0]' - status (0) 12.639: [ 3.803469] power_supply max170xx_battery: driver failed to report `current_now' property: -22 12.640: [ 3.813376] tm2-touchkey 14-0020: failed to get regulators: -517 12.645: [ 3.824026] i2c-gpio i2c-gpio-4: using lines 113 (SDA) and 112 (SCL) 12.645: [ 3.829156] i2c-gpio i2c-mhl: GPIO lookup for consumer sda 12.645: [ 3.834404] i2c-gpio i2c-mhl: using device tree for GPIO lookup 12.645: [ 3.840303] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-mhl[0]' - status (0) 12.645: [ 3.849425] i2c-gpio i2c-mhl: GPIO lookup for consumer scl 12.645: [ 3.854882] i2c-gpio i2c-mhl: using device tree for GPIO lookup 12.645: [ 3.860782] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-mhl[0]' - status (0) 12.778: [ 4.003524] i2c-gpio i2c-mhl: using lines 44 (SDA) and 46 (SCL) 12.778: [ 4.008127] i2c-gpio i2c-gpio-0: GPIO lookup for consumer sda 12.778: [ 4.013692] i2c-gpio i2c-gpio-0: using device tree for GPIO lookup 12.778: [ 4.019943] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-0[0]' - status (0) 12.778: [ 4.029268] i2c-gpio i2c-gpio-0: GPIO lookup for consumer scl 12.778: [ 4.034982] i2c-gpio i2c-gpio-0: using device tree for GPIO lookup 12.778: [ 4.041145] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-0[0]' - status (0) 12.779: [ 4.053385] ak8975 9-000c: GPIO lookup for consumer (null) 12.779: [ 4.057432] ak8975 9-000c: using device tree for GPIO lookup 12.779: [ 4.063066] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-gpio-0/ak8975@c[0]' - status (0) 12.779: [ 4.072898] ak8975 9-000c: mounting matrix not found: using identity... 12.779: [ 4.079497] ak8975 9-000c: supply vdd not found, using dummy regulator 12.779: [ 4.086082] ak8975 9-000c: supply vid not found, using dummy regulator 12.787: [ 4.102177] i2c-gpio i2c-gpio-0: using lines 178 (SDA) and 179 (SCL) 12.787: [ 4.107219] i2c-gpio i2c-gpio-2: GPIO lookup for consumer sda 12.787: [ 4.112783] i2c-gpio i2c-gpio-2: using device tree for GPIO lookup 12.787: [ 4.119000] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-2[0]' - status (0) 12.787: [ 4.128356] i2c-gpio i2c-gpio-2: GPIO lookup for consumer scl 12.787: [ 4.134073] i2c-gpio i2c-gpio-2: using device tree for GPIO lookup 12.787: [ 4.140234] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-2[0]' - status (0) 12.797: [ 4.161048] i2c-gpio i2c-gpio-2: using lines 40 (SDA) and 41 (SCL) 12.797: [ 4.166082] s3c-i2c 13860000.i2c: slave address 0x10 12.797: [ 4.170699] s3c-i2c 13860000.i2c: bus frequency set to 390 KHz 12.799: [ 4.179683] s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter 12.799: [ 4.183794] s3c-i2c 13890000.i2c: slave address 0x10 12.799: [ 4.188507] s3c-i2c 13890000.i2c: bus frequency set to 390 KHz 12.800: [ 4.197398] mms114 3-0048: Unable to get the Core regulator (-517) 12.800: [ 4.202190] s3c-i2c 13890000.i2c: i2c-3: S3C I2C adapter 12.800: [ 4.207708] s3c-i2c 138a0000.i2c: slave address 0x10 12.800: [ 4.212346] s3c-i2c 138a0000.i2c: bus frequency set to 97 KHz 12.802: [ 4.221213] wm8994 4-001a: GPIO lookup for consumer wlf,ldo1ena 12.802: [ 4.225700] wm8994 4-001a: using device tree for GPIO lookup 12.802: [ 4.231320] of_get_named_gpiod_flags: can't parse 'wlf,ldo1ena-gpios' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 12.803: [ 4.242105] of_get_named_gpiod_flags: can't parse 'wlf,ldo1ena-gpio' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 12.803: [ 4.252796] of_get_named_gpiod_flags: parsed 'wlf,ldo1ena' property of node '/soc/i2c@138a0000/wm1811@1a[0]' - status (0) 12.803: [ 4.264457] wm8994 4-001a: GPIO lookup for consumer wlf,ldo2ena 12.803: [ 4.269579] wm8994 4-001a: using device tree for GPIO lookup 12.803: [ 4.275277] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena-gpios' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 12.803: [ 4.286027] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena-gpio' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 12.802: [ 4.296703] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 12.802: [ 4.306927] wm8994 4-001a: using lookup tables for GPIO lookup 12.802: [ 4.312720] wm8994 4-001a: No GPIO consumer wlf,ldo2ena found 12.802: [ 4.319758] s3c-i2c 138a0000.i2c: i2c-4: S3C I2C adapter 12.802: [ 4.324072] s3c-i2c 138b0000.i2c: slave address 0x00 12.802: [ 4.328693] s3c-i2c 138b0000.i2c: bus frequency set to 97 KHz 12.802: [ 4.334900] s3c-i2c 138b0000.i2c: i2c-5: S3C I2C adapter 12.802: [ 4.339970] s3c-i2c 138d0000.i2c: slave address 0x10 12.802: [ 4.344705] s3c-i2c 138d0000.i2c: bus frequency set to 97 KHz 12.837: [ 4.386550] of_get_named_gpiod_flags: can't parse 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/LDO20[0]' 12.837: [ 4.398429] of_get_named_gpiod_flags: can't parse 'maxim,ena-gpio' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/LDO20[0]' 12.837: [ 4.412839] of_get_named_gpiod_flags: parsed 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/LDO21[0]' - status (0) 12.837: [ 4.425800] random: fast init done 12.837: [ 4.430297] of_get_named_gpiod_flags: parsed 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/LDO22[0]' - status (0) 12.838: [ 4.446287] TSP_VDD_1.8V: Bringing 2200000uV into 1800000-1800000uV 12.840: [ 4.454441] LCD_VCC_3.3V: Bringing 3300000uV into 2800000-2800000uV 12.862: [ 4.481492] of_get_named_gpiod_flags: parsed 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/BUCK8[0]' - status (0) 12.862: [ 4.494049] gpio-85 (max77686-regulator): gpiod_request: status -16 12.862: [ 4.501155] VMEM_VDDF_3.0V: Bringing 3000000uV into 2850000-2850000uV 12.862: [ 4.509210] of_get_named_gpiod_flags: parsed 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/BUCK9[0]' - status (0) 13.000: [ 4.660762] max77686-rtc max77686-rtc: registered as rtc0 13.032: [ 4.698580] max77686-rtc max77686-rtc: setting system clock to 2012-01-01T00:31:09 UTC (1325377869) 13.033: [ 4.708033] s3c-i2c 138d0000.i2c: i2c-7: S3C I2C adapter 13.034: [ 4.714392] OF: graph: no port node found in /soc/dsi@11c80000 13.034: [ 4.718997] [drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations 13.034: [ 4.726575] exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops) 13.034: [ 4.735174] panel-samsung-s6e8aa0 11c80000.dsi.0: GPIO lookup for consumer reset 13.034: [ 4.741095] panel-samsung-s6e8aa0 11c80000.dsi.0: using device tree for GPIO lookup 13.034: [ 4.748809] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/dsi@11c80000/panel@0[0]' - status (0) 13.034: [ 4.759724] exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops) 13.034: [ 4.767249] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). 13.564: [ 5.013994] panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x60, 0x90 13.564: [ 5.271796] Console: switching to colour frame buffer device 90x80 13.564: [ 5.315704] exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device 13.564: [ 5.323054] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0 13.563: [ 5.331261] lima 13000000.gpu: gp - mali400 version major 1 minor 1 13.563: [ 5.336150] lima 13000000.gpu: pp0 - mali400 version major 1 minor 1 13.563: [ 5.342456] lima 13000000.gpu: pp1 - mali400 version major 1 minor 1 13.563: [ 5.348816] lima 13000000.gpu: pp2 - mali400 version major 1 minor 1 13.564: [ 5.355147] lima 13000000.gpu: pp3 - mali400 version major 1 minor 1 13.564: [ 5.361437] lima 13000000.gpu: l2 cache 128K, 4-way, 64byte cache line, 64bit external bus 13.564: [ 5.370144] lima 13000000.gpu: bus rate = 160000000 13.564: [ 5.374541] lima 13000000.gpu: mod rate = 50000000 13.564: [ 5.379386] debugfs: Directory '13000000.gpu-mali' with parent 'VDD_G3D' already present! 13.564: [ 5.388273] lima 13000000.gpu: Failed to register cooling device 13.564: [ 5.393965] [drm] Initialized lima 1.1.0 20191231 for 13000000.gpu on minor 1 13.565: [ 5.403291] dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 13.565: [ 5.408902] dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 13.565: [ 5.417349] dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM 13.568: [ 5.428705] rtc rtc1: invalid alarm value: 1900-01-01T00:00:00 13.568: [ 5.433279] s3c-rtc 10070000.rtc: registered as rtc1 13.568: [ 5.439183] s5p-mipi-csis 11880000.csis: lanes: 4, hs_settle: 12, wclk: 0, freq: 166000000 13.568: [ 5.446926] s5p-mipi-csis 11890000.csis: lanes: 1, hs_settle: 18, wclk: 1, freq: 166000000 13.568: [ 5.455871] s5p-fimc-md soc:camera: Entity type for entity FIMC.0 was not initialized! 13.568: [ 5.462751] s5p-fimc-md: Registered fimc.0.m2m as /dev/video4 13.568: [ 5.468440] s5p-fimc-md: Registered fimc.0.capture as /dev/video5 13.567: [ 5.474271] s5p-fimc-md soc:camera: Entity type for entity FIMC.1 was not initialized! 13.567: [ 5.482291] s5p-fimc-md: Registered fimc.1.m2m as /dev/video6 13.567: [ 5.488071] s5p-fimc-md: Registered fimc.1.capture as /dev/video7 13.567: [ 5.494242] s5p-fimc-md: Registered fimc-lite.0.capture as /dev/video8 13.567: [ 5.500633] s5p-fimc-md: Registered fimc-lite.1.capture as /dev/video9 13.573: [ 5.514371] pwrseq_simple sdhci3-pwrseq: GPIO lookup for consumer reset 13.573: [ 5.519509] pwrseq_simple sdhci3-pwrseq: using device tree for GPIO lookup 13.573: [ 5.526440] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdhci3-pwrseq[0]' - status (0) 13.574: [ 5.536212] pwrseq_simple sdhci3-pwrseq: GPIO array info: chip=gpj0, size=1, get_mask=1, set_mask=1, invert_mask=1 13.574: [ 5.547238] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc/sdhci@12530000[0]' - status (0) 13.574: [ 5.556555] s3c-sdhci 12530000.sdhci: clock source 2: mmc_busclk.2 (50000000 Hz) 13.574: [ 5.563943] s3c-sdhci 12530000.sdhci: GPIO lookup for consumer cd 13.574: [ 5.569939] s3c-sdhci 12530000.sdhci: using device tree for GPIO lookup 13.574: [ 5.576609] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc/sdhci@12530000[0]' - status (0) 13.574: [ 5.586547] s3c-sdhci 12530000.sdhci: Got CD GPIO 13.574: [ 5.591207] s3c-sdhci 12530000.sdhci: GPIO lookup for consumer wp 13.574: [ 5.597306] s3c-sdhci 12530000.sdhci: using device tree for GPIO lookup 13.574: [ 5.603915] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/sdhci@12530000[0]' 13.574: [ 5.613177] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/sdhci@12530000[0]' 13.574: [ 5.622392] s3c-sdhci 12530000.sdhci: using lookup tables for GPIO lookup 13.573: [ 5.629163] s3c-sdhci 12530000.sdhci: No GPIO consumer wp found 13.600: [ 5.663598] mmc0: SDHCI controller on samsung-hsmmc [12530000.sdhci] using ADMA 13.601: [ 5.671154] s3c-sdhci 12540000.sdhci: clock source 2: mmc_busclk.2 (40000000 Hz) 13.601: [ 5.677275] s3c-sdhci 12540000.sdhci: GPIO lookup for consumer wp 13.601: [ 5.683175] s3c-sdhci 12540000.sdhci: using device tree for GPIO lookup 13.601: [ 5.689893] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/sdhci@12540000[0]' 13.601: [ 5.699166] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/sdhci@12540000[0]' 13.601: [ 5.708325] s3c-sdhci 12540000.sdhci: using lookup tables for GPIO lookup 13.601: [ 5.715089] s3c-sdhci 12540000.sdhci: No GPIO consumer wp found 13.601: [ 5.721013] s3c-sdhci 12540000.sdhci: allocated mmc-pwrseq 13.630: [ 5.756981] mmc1: SDHCI controller on samsung-hsmmc [12540000.sdhci] using ADMA 13.632: [ 5.766101] dwmmc_exynos 12550000.mmc: IDMAC supports 32-bit address mode. 13.632: [ 5.772140] dwmmc_exynos 12550000.mmc: Using internal DMA controller. 13.632: [ 5.777991] dwmmc_exynos 12550000.mmc: Version ID is 240a 13.632: [ 5.783361] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 118,32 bit host data width,128 deep fifo 13.632: [ 5.792994] dwmmc_exynos 12550000.mmc: GPIO lookup for consumer wp 13.632: [ 5.798994] dwmmc_exynos 12550000.mmc: using device tree for GPIO lookup 13.632: [ 5.805686] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@12550000[0]' 13.632: [ 5.814797] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@12550000[0]' 13.632: [ 5.823801] dwmmc_exynos 12550000.mmc: using lookup tables for GPIO lookup 13.632: [ 5.830666] dwmmc_exynos 12550000.mmc: No GPIO consumer wp found 13.632: [ 5.836688] mmc_host mmc2: card is non-removable. 13.643: [ 5.854032] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) 13.643: [ 5.863435] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) 13.644: [ 5.870634] mmc1: queuing unknown CIS tuple 0x80 (6 bytes) 13.644: [ 5.875155] exynos-adc 126c0000.adc: IRQ index 1 not found 13.648: [ 5.885190] input: max77693-haptic as /devices/platform/i2c-gpio-1/i2c-11/11-0066/max77693-haptic/input/input2 13.712: [ 5.959149] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) 13.712: [ 5.968329] mmc2: new DDR MMC card at address 0001 13.718: [ 5.979367] mmc1: new high speed SDIO card at address 0001 13.718: [ 5.984362] mmcblk2: mmc2:0001 MAG4FB 14.7 GiB 13.718: [ 5.988554] mmcblk2boot0: mmc2:0001 MAG4FB partition 1 2.00 MiB 13.718: [ 5.994580] mmcblk2boot1: mmc2:0001 MAG4FB partition 2 2.00 MiB 13.718: [ 6.000195] mmcblk2rpmb: mmc2:0001 MAG4FB partition 3 128 KiB, chardev (245:0) 13.722: [ 6.012890] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 13.767: [ 6.064764] input: tm2-touchkey as /devices/platform/i2c-gpio-4/i2c-14/14-0020/input/input3 13.769: [ 6.074503] of_get_named_gpiod_flags: parsed 'standby-gpios' property of node '/soc/i2c@13860000/s5c73m3@3c[0]' - status (0) 13.769: [ 6.084323] of_get_named_gpiod_flags: parsed 'xshutdown-gpios' property of node '/soc/i2c@13860000/s5c73m3@3c[0]' - status (0) 13.769: [ 6.096467] S5C73M3: S5C73M3 SPI probed successfully 13.783: [ 6.116685] S5C73M3: Sensor type: CML0801-M080, FW version: GHFJ02 13.786: [ 6.125880] s5p-fimc-md: Registered sensor subdevice: S5C73M3-OIF (0) 13.786: [ 6.130852] S5C73M3: s5c73m3_probe: completed successfully 13.786: [ 6.138073] input: MELFAS MMS114 Touchscreen as /devices/platform/soc/13890000.i2c/i2c-3/3-0048/input/input4 13.787: [ 6.148022] wm8994 4-001a: GPIO lookup for consumer wlf,ldo1ena 13.787: [ 6.152695] wm8994 4-001a: using device tree for GPIO lookup 13.787: [ 6.158161] of_get_named_gpiod_flags: can't parse 'wlf,ldo1ena-gpios' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 13.787: [ 6.168904] of_get_named_gpiod_flags: can't parse 'wlf,ldo1ena-gpio' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 13.787: [ 6.179593] of_get_named_gpiod_flags: parsed 'wlf,ldo1ena' property of node '/soc/i2c@138a0000/wm1811@1a[0]' - status (0) 13.787: [ 6.190954] VSIL_1.2V: supplied by VCC_SUB_2.0V 13.788: [ 6.196539] wm8994 4-001a: GPIO lookup for consumer wlf,ldo2ena 13.788: [ 6.201015] wm8994 4-001a: using device tree for GPIO lookup 13.788: [ 6.206689] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena-gpios' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 13.787: [ 6.217547] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena-gpio' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 13.787: [ 6.228092] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena' property of node '/soc/i2c@138a0000/wm1811@1a[0]' 13.787: [ 6.238318] wm8994 4-001a: using lookup tables for GPIO lookup 13.787: [ 6.244137] wm8994 4-001a: No GPIO consumer wlf,ldo2ena found 13.788: [ 6.252156] wm8994 4-001a: supply DBVDD2 not found, using dummy regulator 13.788: [ 6.257791] wm8994 4-001a: supply DBVDD3 not found, using dummy regulator 13.788: [ 6.265387] wm8994 4-001a: supply AVDD2 not found, using dummy regulator 13.788: [ 6.271110] wm8994 4-001a: supply CPVDD not found, using dummy regulator 13.788: [ 6.277842] wm8994 4-001a: supply SPKVDD1 not found, using dummy regulator 13.788: [ 6.284709] wm8994 4-001a: supply SPKVDD2 not found, using dummy regulator 13.791: [ 6.295901] wm8994 4-001a: WM1811 revision D CUST_ID 00 13.795: [ 6.305142] wm8994 4-001a: No interrupt specified, no interrupts 13.795: [ 6.310045] gpiochip_find_base: found new base at 501 13.795: [ 6.314943] gpio gpiochip42: (wm8994): added GPIO chardev (254:42) 13.795: [ 6.320874] gpio gpiochip42: registered GPIOs 501 to 511 on wm8994 13.798: [ 6.330567] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/camera/fimc-is@12000000/i2c-isp@12140000/s5k6a3@10[0]' - status (0) 13.798: [ 6.342224] s5p-fimc-md: Registered sensor subdevice: S5K6A3 13-0010 (1) 13.798: [ 6.348662] s5p-fimc-md: created link [S5C73M3-OIF] => [s5p-mipi-csis.0] 13.797: [ 6.355335] s5p-fimc-md: created link [S5K6A3 13-0010] => [s5p-mipi-csis.1] 13.797: [ 6.362265] s5p-fimc-md: created link [s5p-mipi-csis.0] => [FIMC.0] 13.797: [ 6.368528] s5p-fimc-md: created link [s5p-mipi-csis.0] -> [FIMC.1] 13.797: [ 6.374781] s5p-fimc-md: created link [s5p-mipi-csis.0] -> [FIMC-LITE.0] 13.797: [ 6.381446] s5p-fimc-md: created link [s5p-mipi-csis.0] -> [FIMC-LITE.1] 13.797: [ 6.388144] s5p-fimc-md: created link [s5p-mipi-csis.1] -> [FIMC-LITE.0] 13.797: [ 6.394829] s5p-fimc-md: created link [s5p-mipi-csis.1] -> [FIMC-LITE.1] 13.798: [ 6.403516] ntc-thermistor thermistor-ap: Thermistor type: ncp15wb473 successfully probed. 13.798: [ 6.410945] ntc-thermistor thermistor-battery: Thermistor type: ncp15wb473 successfully probed. 13.798: [ 6.419864] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/key-down[0]' - status (0) 13.798: [ 6.429131] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/key-up[0]' - status (0) 13.798: [ 6.438373] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/key-power[0]' - status (0) 13.798: [ 6.448204] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/key-ok[0]' - status (0) 13.798: [ 6.457801] input: gpio-keys as /devices/platform/gpio-keys/input/input5 13.798: [ 6.464993] cfg80211: Loading compiled-in X.509 certificates for regulatory database 13.798: [ 6.474154] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 13.798: [ 6.479287] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 13.798: [ 6.487815] cfg80211: failed to load regulatory.db 13.841: [ 6.536460] ALSA device list: 13.841: [ 6.537946] #0: Dummy 1 13.848: [ 6.549718] EXT4-fs (mmcblk2p13): mounted filesystem without journal. Opts: (null) 13.848: [ 6.556027] VFS: Mounted root (ext4 filesystem) readonly on device 179:13. 13.848: [ 6.563194] devtmpfs: mounted 13.851: [ 6.569742] Freeing unused kernel memory: 1024K 13.881: [ 6.604611] Run /init as init process 13.881: [ 6.606803] with arguments: 13.881: [ 6.609751] /init 13.881: [ 6.612006] with environment: 13.881: [ 6.615276] HOME=/ 13.881: [ 6.617537] TERM=linux 13.902: [ 6.642004] random: init: uninitialized urandom read (40 bytes read) 14.089: [ 6.835481] random: init: uninitialized urandom read (40 bytes read) 14.106: [ 6.858966] init: init first stage started! 14.106: [ 6.862096] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt 14.107: [ 6.871648] init: Using Android DT directory /proc/device-tree/firmware/android/ 14.107: [ 6.878302] init: First stage mount skipped (missing/incompatible/empty fstab in device tree) 14.107: [ 6.886282] init: Skipped setting INIT_AVB_VERSION (not in recovery mode) 14.109: [ 6.896382] random: init: uninitialized urandom read (40 bytes read) 14.158: [ 6.951670] init: Loading SELinux policy 14.185: [ 6.982342] SELinux: Permission perfmon in class capability2 not defined in policy. 14.185: [ 6.988646] SELinux: Permission bpf in class capability2 not defined in policy. 14.185: [ 6.996046] SELinux: Permission perfmon in class cap2_userns not defined in policy. 14.186: [ 7.003716] SELinux: Permission bpf in class cap2_userns not defined in policy. 14.186: [ 7.011398] SELinux: Class perf_event not defined in policy. 14.186: [ 7.016891] SELinux: Class lockdown not defined in policy. 14.186: [ 7.022413] SELinux: the above unknown classes and permissions will be denied 14.186: [ 7.029569] SELinux: policy capability network_peer_controls=1 14.186: [ 7.035488] SELinux: policy capability open_perms=1 14.186: [ 7.040419] SELinux: policy capability extended_socket_class=1 14.186: [ 7.046428] SELinux: policy capability always_check_network=0 14.187: [ 7.052061] SELinux: policy capability cgroup_seclabel=0 14.187: [ 7.057459] SELinux: policy capability nnp_nosuid_transition=1 14.187: [ 7.063346] SELinux: policy capability genfs_seclabel_symlinks=0 14.376: [ 7.261974] audit: type=1403 audit(1325377872.050:2): auid=4294967295 ses=4294967295 lsm=selinux res=1 14.376: [ 7.270110] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy 14.376: [ 7.270110] 14.385: [ 7.289470] selinux: SELinux: Loaded file_contexts 14.385: [ 7.289470] 14.442: [ 7.353139] init: init second stage started! 14.473: [ 7.388099] init: Using Android DT directory /proc/device-tree/firmware/android/ 14.477: [ 7.399388] selinux: SELinux: Loaded file_contexts 14.477: [ 7.399388] 14.477: [ 7.404260] init: Running restorecon... 14.480: [ 7.412818] selinux: SELinux: Could not stat /dev/block: No such file or directory. 14.480: [ 7.412818] 14.486: [ 7.427690] selinux: avc: denied { set } for property=persist.service.adb.enable pid=1 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service permissive=1 14.486: [ 7.427690] 14.486: [ 7.447298] init: Couldn't load property file '/product_services/build.prop': open() failed: No such file or directory: No such file or directory 14.486: [ 7.458946] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory 14.486: [ 7.472718] init: Setting product property ro.product.brand to 'Samsung' (from ro.product.odm.brand) 14.486: [ 7.480457] init: Setting product property ro.product.device to 'i9305' (from ro.product.odm.device) 14.561: [ 7.564598] cgroup: Unknown subsys name 'blkio' 14.561: [ 7.568611] audit: type=1400 audit(1325377872.360:3): avc: denied { module_request } for pid=1 comm="init" kmod="fs-cpuset" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1 14.561: [ 7.569971] cgroup: Unknown subsys name 'schedtune' 14.628: [ 7.659608] ueventd: ueventd started! 14.631: [ 7.666770] selinux: SELinux: Loaded file_contexts 14.631: [ 7.666770] 14.631: [ 7.671817] ueventd: Parsing file /ueventd.rc... 14.632: [ 7.678185] ueventd: Parsing file /vendor/ueventd.rc... 14.632: [ 7.681993] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory 14.632: [ 7.692088] ueventd: Parsing file /odm/ueventd.rc... 14.632: [ 7.696951] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory 14.632: [ 7.706663] ueventd: Parsing file /ueventd.smdk4x12.rc... 14.632: [ 7.707579] apexd: Bootstrap subcommand detected 14.632: [ 7.712004] ueventd: Unable to read config file '/ueventd.smdk4x12.rc': open() failed: No such file or directory 14.633: [ 7.729071] apexd: Scanning /system/apex for embedded keys 14.633: [ 7.734518] apexd: Scanning /product/apex for embedded keys 14.633: [ 7.738814] apexd: ... does not exist. Skipping 14.633: [ 7.743313] apexd: Scanning /system/apex looking for APEX packages. 14.633: [ 7.749811] apexd: Found /system/apex/com.android.conscrypt 14.633: [ 7.755379] apexd: Skipped when bootstrapping 14.633: [ 7.759467] apexd: Found /system/apex/com.android.media 14.633: [ 7.764918] apexd: Skipped when bootstrapping 14.633: [ 7.769014] apexd: Found /system/apex/com.android.media.swcodec 14.642: [ 7.785032] printk: apexd: 9 output lines suppressed due to ratelimiting 14.701: [ 7.850480] power_supply max170xx_battery: driver failed to report `current_now' property: -22 14.701: [ 7.858376] synth uevent: /devices/platform/i2c-gpio-3/i2c-12/12-0036/power_supply/max170xx_battery: failed to send uevent 14.701: [ 7.868654] power_supply max170xx_battery: uevent: failed to send synthetic uevent 15.028: [ 8.205009] ueventd: Coldboot took 0.477 seconds 15.383: [ 8.565093] mms114 3-0048: TSP Rev: 0x42, HW Rev: 0x1, Firmware Ver: 0xbd 15.580: [ 8.768000] audit: type=1400 audit(1325377873.560:4): avc: denied { create } for pid=1 comm="init" name="sdcard" scontext=u:r:init:s0 tcontext=u:object_r:tmpfs:s0 tclass=lnk_file permissive=1 15.597: [ 8.802983] cgroup: Unknown subsys name 'bfqio' 15.695: [ 8.905813] logd.auditd: start 15.695: [ 8.907437] logd.klogd: 8903546959 15.726: [ 8.942787] wake enabled for irq 170 15.726: [ 8.944974] wake enabled for irq 171 15.730: [ 8.953934] reboot: Restarting system with comma<0e> 16.609: Samsung S-Boot 4.0 for GT-I9305 (Apr 6 2017 - 16:19:04) 16.609: 16.609: EXYNOS4412(EVT 1.1) / 2044MB / 0MB / Rev 2 / I9305XXSFQD1 /(PKG_ID 0x704f018) 16.609: 16.609: BOOTLOADER VERSION : I9305XXSFQD1 16.609: 16.609: PMIC rev = PASS2(4) 16.609: BUCK1OUT(vdd_mif) = 0x05 16.614: BUCK3DVS1(vdd_int) = 0x28 16.614: cardtype: 0x00000007 16.666: SB_MMC_HS_52MHZ_1_8V_3V_IO 16.666: mmc->card_caps: 0x00000311 16.666: mmc->host_caps: 0x00000311 16.666: [mmc] capacity = 30777344 16.667: 16.667: 16.667: MODEL_NAME:{{GT-I9305}} 16.667: eMMC_SERIAL_NUMBER:{XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX}} 16.667: 16.667: